Infectious Disease Disinfection
Disinfection for infectious disease uses EPA-registered products with complete coverage of surfaces.
See infectious disease disinfectionGet high-touch surfaces cleaned and disinfected in a home, office, rental or shared space in Crosstown after illness or possible exposure. EPA-registered products are used according to their labels.
COVID-19 and virus disinfection is a focused cleaning service for frequently touched surfaces and affected areas after illness or suspected exposure. It combines soil removal with an EPA-registered disinfectant used for the full contact time on its label.
Homes, schools, offices, restaurants, rentals, care settings and similar shared properties can be included. Technicians locate frequent touch points, including counters, desks, light switches, door knobs, restroom fixtures and communal equipment. Surfaces close to those points are considered as well when people could touch them while walking through the building.
This work is sometimes called coronavirus cleaning, COVID-19 decontamination, biohazard decontamination, biohazard remediation or infectious disease cleanup. It is different from ordinary janitorial cleaning. Cleanup crews use protective equipment, product instructions and a written scope so every step can be checked. The remediation process does not replace fresh air, building ventilation, handwashing or staying home when sick.

The scope can fit restaurants, offices, residences, rentals and other shared environments without treating every situation identically.
When you or your loved ones need privacy, technicians can arrive in unmarked vehicles, wear protective gear and respect personal property.
The disinfectant name and label contact time are recorded so you know what was used on the property and can move forward with reopening plans.
Before work begins, you can verify every room, surface and sensitive material included in the cleaning service. Use a clear scope to compare the tasks listed.
COVID-19 disinfection can help when a room-by-room, documented cleaning plan is needed because of an illness, possible exposure or frequent use by many occupants. Situations commonly include:
After an illness, surfaces touched often throughout bedrooms, kitchens, bathrooms and common living spaces require careful cleaning.
After illness is reported or before another approved use, property owners may schedule cleaning for hotels, apartments or short-term rentals.
During an urgent emergency response, surrounding areas stay restricted by an owner or manager as work concentrates on the affected area. Unless another incident calls for it, law enforcement generally has no involvement.
Compatible surfaces in restrooms, dining spaces, service counters and back-of-house areas may be included while food and food-contact items are treated correctly.
First, restrict entry and collect accurate details about each room involved. Take these steps before cleanup technicians come inside:
Call (888) 351-0904Published guides do not include a stand-alone COVID-19 price. For comparable infectious disease disinfection, published guide figures run from $1,000 to $10,000. Actual scope varies based on the space and germ, how many rooms and surfaces are included, whether air-system work is part of the request and whether testing is wanted.
Published national cost guides are the source for these ranges, rather than an inspection of your property. The price for your property is set after the on-site assessment, and you hear it before work starts.
Ask about cost: (888) 351-0904Insurance coverage can differ according to both policy terms and the reason for cleanup. Do not count on renters, business or homeowners insurance to pay for coronavirus cleaning done as prevention. Contact the insurance company in advance of the work when time allows.
Before counting on coverage, business owners should examine necessary documentation, deductibles, exclusions and communicable disease provisions with the insurance company.
Local requirements, lease terms and the affected area's location may determine who arranges cleanup in a rental or common space.
Store the product information, work scope, invoice and photographs. These records support insurance assistance and help insurance companies check what work was requested and completed.
A policy may treat standard disinfection as property maintenance rather than covered damage. Ask if your policy treats another event differently from a documented illness.
Coronavirus biohazard decontamination follows a controlled sequence. The cleanup involves assessment, cleaning, disinfection and a final check. The product label guides every step of the entire process and how each surface is treated.
Before beginning, technicians examine high-touch spots, sensitive materials, room use and occupancy history with you.
The work area is marked or closed as needed, and technicians select gloves, eye protection and other protective equipment for the products and setting.
Cleaning begins with removal of dust and visible soil, which could otherwise block disinfectant from contacting a surface evenly.
For compatible materials, treatment uses an EPA-registered disinfectant with concentration and coverage based on label instructions.
Instead of an immediate wipe after spraying, the treated material stays wet throughout the contact time on the label.
Methods appropriate to each item are used for soft materials, unfinished wood and shared electronics rather than saturating them with an all-purpose spray.
Technicians verify the checklist one room at a time and focus particularly on fixtures, shared equipment, switches and door pulls.
You get the finished scope, details about the products and guidance covering ventilation, drying and when you may use the treated space.
Call at any time. A COVID-19 and virus disinfection specialist answers, explains the steps and agrees a start time with you.
During disinfection, the main concerns are incomplete coverage, chemical mistakes and possible illness exposure. Planning the work carefully helps prevent avoidable contact and serious health risks, without suggesting that cleaning a surface takes away all routes through which illness can spread.
Frequently missed spots include remotes, shared tools, door plates and faucet controls. A room-by-room checklist helps cover the full affected area.
Additional chemical can sometimes be less safe. An incorrect product, combined cleaners or insufficient airflow may cause irritation and damage electronics, finished surfaces, wood or fabric.
The label states how long a disinfectant needs to stay visibly wet. Drying the product by wiping too early may prevent it from performing as intended.
Can you clean it yourself? When nobody is presently ill and no unusual exposure concern exists at the property, standard cleaning could be sufficient. For a known illness, a large shared space, sensitive surfaces or a workplace that needs a clear scope, professional cleanup can help you follow product labels and cover the important touch points.
A focused residential visit may take several hours, while a large office or multi-room commercial site can require a longer visit or work in stages. The room count, amount of furniture, surface compatibility and required contact times set the schedule.
| Scene | Typical time on site |
|---|---|
| Focused home area | Commonly finished in a single scheduled visit |
| A small workplace or multiple rooms | Could take half a day or more |
| Large or occupied commercial property | Often scheduled as stages to work around access |
A room's smell cannot show that COVID-19 or another virus has been removed because these viruses do not produce a confirming odor. Fog, deodorizer or fragrance by itself cannot replace soil removal, complete high-touch coverage and the required disinfectant contact time.
Odor control and indoor air quality require planning apart from disinfecting surfaces. Ventilating the area can clear treatment fumes, while staff responsible for the building can examine filtration and outdoor-air settings. If the source is mold, water damage, sewage backup or another condition, separate restoration or cleanup may be needed. More disinfectant is not the appropriate response.
Choose an EPA-registered disinfectant suited to both the surface and target virus, then follow all label directions covering dilution, use and complete contact time.
Where you may apply the disinfectant, the ventilation required and the protective equipment to wear are all controlled by its label.
Federal requirements for worker protection and handling under OSHA Bloodborne Pathogens Standard 29 CFR 1910.1030 apply if the area also contains other potentially infectious materials or blood.
Tennessee treats soaked materials from a biohazard scene as medical waste, a type of special waste. Rules from the Department of Environment and Conservation's Division of Solid Waste Management control its treatment and disposal, so it cannot go in household trash.
The full COVID-19 and virus disinfection guide covers what is cleaned or removed, odor and air quality work, and the rules that apply in Shelby County.
Read the full COVID-19 and virus disinfection guide
Planning for access, containment and cleanup can depend on local population, housing and entry conditions.
The approximately 1.4 mile trip to Methodist Hospitals of Memphis matters when an injury must be assessed before anyone returns to the affected space.
Crosstown is near Speedway Terrace, Stonewall Place, and Midtown, which can matter when family members are arriving from surrounding communities.
The Shelby County location helps orient travel, while the neighborhood and full address identify where private cleanup work actually occurs.
Ask on the call about cleanup options for neighboring communities and ZIP codes.
Disinfection for infectious disease uses EPA-registered products with complete coverage of surfaces.
See infectious disease disinfection
MRSA, C. diff and norovirus cleanup for homes, care settings and gyms.
See mrsa, c. diff and norovirus cleanup
Site access and operating needs guide planning for commercial and industrial biohazard cleanup.
See commercial and industrial biohazard cleanup
Biohazard cleanup for clinics, care homes and healthcare facilities.
See hospital and healthcare biohazard cleanup
Workplace biohazard cleanup addresses offices after injuries or exposure incidents.
See office and workplace biohazard cleanup
Outside teaching hours, biohazard cleanup treats daycare and school facilities.
See school and daycare biohazard cleanup
Hotels, rental properties and Airbnb units receive biohazard cleanup.
See hotel, airbnb and rental biohazard cleanup
Biohazards are cleaned from carpets and upholstery, or affected materials are removed safely when needed.
See biohazard carpet and upholstery cleaningCoverage does not apply by default. Routine or preventive disinfection may count as maintenance under many policies, and treatment of another event depends on the policy. Call your insurance company, explain why the work is needed and ask about exclusions, the deductible and required records. Save photos, the product list, your invoice and the scope for assessment of the claim.
A virus may be a biological hazard due to its ability to cause disease. How much risk exists is shaped by the setting, task, route of exposure and virus. A disinfection plan should match the actual hazard. No individual step replaces the rest, since appropriate disinfectant, cleaning, access control and protective equipment each serve a role.
An EPA-registered disinfectant should have label directions supporting the target virus or an emerging viral pathogen. The label matters more than a product's scent or strength. It tells you the surfaces, dilution, application method, protective equipment and contact time required for the disinfectant to work as intended.
Alcohol can inactivate the virus that causes COVID-19 when the concentration, surface and wet contact time are appropriate. For a hard surface, select an EPA-registered product or the maker's recommended alternative and obey the product label. Never spray alcohol around flames or heat, and remember that wiping quickly may not allow adequate contact time.
Read the disinfectant label and furniture care instructions after checking if the wooden surface is sealed. Spot-test first, then use a compatible product on the sealed wood. Do not soak delicate or bare wood, which can swell, stain or suffer finish loss. Use a method suited to the material when the label does not permit the surface.
Begin by cleaning visible soil, then use an EPA-registered disinfectant appropriate to the surface and virus being targeted. Cover the surface fully and keep it wet for the contact time on the label. Follow label requirements for protective equipment and ventilation, and keep every cleaning chemical separate from the others.
Respectful, discreet COVID-19 and virus disinfection is available 24 hours a day, and crews arrive in unmarked vehicles.